If you are looking for a Sliding Gate Motor we have a range to suit residential and commercial requirements. Contact us for more information.

We install in all Australian states and territories – Queensland, New South Wales, Australian Capital Territory , Victoria, Tasmania, South Australia, Western Australia and Northern Territory.

Our quality European sliding gate motors cater to gates big or small, light or weighing up to a massive 1800kg. We have a range of safety equipment, back up battery’s and remotes controls so you can navigate your driveway safe and secure while in your vehicle. 

We have a full range of options for you to open your gate from keypads, swipes readers, Bluetooth, WIFI, intercoms and key switches.

All our sliding gate motors are tested to meet European and Australian standards so you can trust you are getting a quality motor at an affordable price.

All Ditec and FAAC sliding gate motors are TUV tested the most stringent European quality standards.

Sliding Gate Motor FAAC C720 and C721

FAAC C720/C721 Sliding Gate Motor

The FAAC C720/C721 domestic sliding gate motors offer two very powerful low voltage options, built to work in our climate and conditions

  • 24V gearmotor with Integrated control board with virtual encoder
  • Duty Cycle – 100%
  • C721 max weight of 800kg (Magnetic limit)
  • C720 max weight 400kg (Magnetic limit)
  • Opening and closing time Max speed of 18 m/min
  • New moving axes speed reduction principle (FAAC patented) – Very high mechanical efficiency (>80%) Up to 50% compared to traditional gearboxes
  • 433 MHz or 868 MHz Radio
  • Made in Italy
  • Fully certified and tested by TÜV SÜD
  • 2 Year Warranty
  • FAAC C720 and C721 Sliding Gate Motor Brochure
FAAC 740

FAAC 740 Sliding Gate Motor

The FAAC 740 Domestic sliding gate motor is a powerful 230V gearmotor with strong performance and built to work in our climate and conditions

  • 230V Gearmotor
  • Duty Cycle – 30%
  • Max weight 500Kg (Magnetic limit)
  • Opening and closing time Max speed of 12 m/min
  • Integrated encoder with reverse function upon obstacle detection
  • 433 MHz Radio
  • Made in Italy
  • Fully certified and tested by TÜV SÜD
  • 24 Month Warranty
  • FAAC 740 Sliding Gate Motor Brochure
FAAC 740

FAAC 741

The FAAC 740 Domestic/Commercial sliding gate motor is a powerful 230V gearmotor with strong performance and built to work in our climate and conditions

  • 230V Gearmotor
  • Duty Cycle – 40%
  • Max weight 900Kg (Magnetic limit)
  • Opening and closing time Max speed of 12 m/min
  • Integrated encoder with reverse function upon obstacle detection
  • 433 MHz Radio
  • Made in Italy
  • Fully certified and tested by TÜV SÜD
  • 2 Year Warranty
  • FAAC 740 Sliding Gate Motor Brochure

FAAC 844ER

The FAAC 844ER Commercial/Industrial sliding gate motor is one of the most powerful on the market. Tried and tested for the Australian climate

  • 230V Gearmotor
  • Duty Cycle – 70%
  • Max weight 1800Kg (Magnetic limit)
  • Opening and closing time Max speed of 12 m/min
  • Oil-bath gearmotor
  • Integrated encoder with reverse function upon obstacle detection
  • 433 MHz Radio
  • Made in Italy
  • Fully certified and tested by TÜV SÜD
  • 24 Month Warranty
  • FAAC 844ER Sliding Gatee Motor Brochure

FAAC C851

The FAAC C851 Commercial/Industrial sliding gate motor is not only one of the most powerful sliding gate motors on the market but also one of the fastest.

Ideal for special applications where fast operation is required

  • 230V power supply with 1 KW three phase with four poles
  • Duty Cycle – 100%
  • Max weight 1800Kg (Integrated mechanics + magnetic limit)
  • Opening and closing time Max speed of 40 m/min
  • Gearmotor – worm screw with oil lubrication
  • Irreversibility guaranteed by integrated electric brake
  • 433 MHz Radio
  • Made in Italy
  • Fully certified and tested by TÜV SÜD
  • 2 Year Warranty
  • FAAC C851 Sliding Gate Motor Brochure

Centsys D2 Turbo Sliding Gate Motor

The Centsys D2 Turbo Domestic sliding gate motor is a fantastic operator for its price and is packed full of features including inbuilt back up battery. Its also made from almost 100% recyclable materials.

  • 12V DC Motor
  • Inbuilt back up battery
  • Duty Cycle – 10%
  • Max weight of 250kg
  • Opening and closing time Max speed of 24 m/min (depending on load)
  • The control panel is fully sealed to prevent ingress of dirt and insects
  • 433 MHz
  • 24 Month Warranty
  • Centsys D2 Turbo Brochure
Centsys D5 Evo

Centsys D5-Evo Sliding Gate Motor

The Centsys D5-Evo sliding gate motor is the fastest domestic/industrial gate motor in its class.  Boasting 22 metres per minute it will open a 6-metre gate in 16 seconds. With built in back up battery and a control panel with options for pillar lights, gate operating modes, a 365-day timer to time bar or activate physical inputs and individual radio transmitters. This can be used to give people access during the working day but not at weekends or after hours.

  • 12V DC Motor
  • Inbuilt back up battery
  • Duty Cycle – 50%
  • Max weight of 500kg
  • Opening and closing time Max speed of 22 m/min
  • 433 MHz
  • The control panel is fully sealed to prevent ingress of dirt and insects
  • 24 Month Warranty
  • Centsys D5-Evo Brochure 

Centsys D10

The Centsys D10 gate motor for commercial/industrial sliding gate motor is the powerful gate motor, come with built in back up battery and a control panel options pillar lights, gate operating modes, a 365day timer to time bar or activate physical inputs and individual radio transmitters. This can be used to give people access during the working day but not at weekends or after hours.

  • 24V DC Motor
  • Inbuilt back up battery
  • Duty Cycle – 45%
  • Max weight of 1000kg
  • Intelligent automatic setup
  • Opening and closing time Max speed of 22-26 m/min
  • 433 MHz
  • The control panel is fully sealed to prevent ingress of dirt and insects.
  • 24 Month Warranty
  • Centsys D10 Brochure
Sliding Gate Motor Ditec Neos

NeoS 400 / 600

Ditec NeoS is an automatic sliding gate motor for residential, commercial and industrial applications. It is designed to resist even under heavy

Geared motor for frequent duty and built in control board

  • Opening and closing speed up to 25 cm/sec
  • Design for demanding weather conditions.
  • Low consumption and energy saving mode
  • 433 MHz Radio
  • NeoS 400 up to 400kg with virtual encoder (magnetic limits optional)
  • NeoS 600 up to 600kg with virtual encoder (magnetic limits)
  • Adjustable opening speed can open at 0.16 or 0.25m/s
  • Ditec Neos Product Brochure
Ditec ION sliding gate motor

Ditec ION

Ditec ION is the new range of electro mechanical actuators for sliding gates designed to guarantee quality, sturdiness and reliability over time.
The range is made up of two motors per 400 Kg and 600 Kg wing, and integrates the multi function control panel in the operating device

  • rapid self-learning procedure, which automatically records all stopping positions and is self-adjusting
  • 433 MHz Radio
  • Low consumption and energy saving mode
  • 24V Virtual encoder
  • ION 4 up to 400kg with virtual encoder
  • ION 6 up to 600kg with virtual encoder 
  • Optional magnetic limit switches
  • Optional Battery back up
  • Adjustable opening speed can open at 0.1 to 0.3m/s – which makes this one of the fastest domestic/light commercial motors on the market
  • Ditec ION Product Brochure
Ditec Neo sliding gate motor

NeoS 1000

Ditec NeoS is an automatic sliding gate motor for commercial and industrial applications. It is designed for heavy use.
  • Opening and closing speed up to 25 cm/sec
  • Low consumption and energy saving mode
  • 433 MHz Radio
  • NeoS 1000 up to 1000kg with virtual encoder (magnetic limits)
  • Ditec Neos Product Brochure